We also provide a full installation service for all our marina berth products throughout the Auckland region - click here for more information
Barrier Speciality Marina Fenders are designed to solve the more unusual fendering needs in a marina berth.
Designed for boats whose boarding platform is lower than the wooden waler in their marina berth.
The fender is designed to be installed underneath the walers found in most marinas throughout New Zealand, with a total thickness of 90-100mm (usually made up from two planks each being 45mm thick, or composite fibreglass).
Fitted with special tabs to hold it up underneath the waler.
Fender dimensions (L x H x T) = 2000 x 200 x 100mm with a 50mm attachment tab.
Designed for boats whose boarding platform is lower than the wooden waler in their marina berth.
The fender is designed to be installed underneath the thicker walers found in some marinas throughout New Zealand (usually on larger walkways / piers), with a total thickness of 150mm (usually made up from two planks each being 75mm thick)
Fitted with special tabs to hold it up underneath the waler
Fender dimensions (L x H x T) = 2000 x 200 x 150mm with a 50mm attachment tab.
Designed to provide maximum protection for boats whose boarding platform is lower than the wooden waler in their marina berth.
This fender is designed to beinstalled in front of / over the top of a below waler fender. This provides maximum protection for a boarding platform from contacting the bottom of a waler.
This fender works best when there is no rub strip fitted in the marina berth.
Fitted with an anti-flip tab to stop the fender from being blown up onto the dock in strong winds.
Fender dimensions (L x H x T) = 2000 x 400 x 100mm with a 100mm attachment tab.
Because our Barrier Speciality Marina Fenders have specific purposes, we only hold minimal stock and will usually make to order. Please allow 2 weeks for manufacture.
